Armoring vehicles

“TEREM-OVECH” LTD Provadia carries out armoring and re-equipment of vehicles with the following degrees of armor protection:

Standard EN 1522:

  • FB2
  • FB2+
  • FB4+

Standard EN 1063:

  • BR2
  • BR4+

for the following purposes:

  • Encashment
  • Transportation of VIP
  • For special designation

According to the regulations specifying the security of bank and other financial institutions and precisely the money and valuables transportation security requirements, as well as the demand of encashment vehicles in Bulgaria, we have developed and re-equipped vehicles with the following degrees of armor protection:

Version 1 include armor protection:

  • In front, at the rear, sideways the coupe, the accumulator and the fuel tank from 7,62 x 39 mm cartridge from AK4 7: BR4+ according to EN 1522;
  • From above and underneath from 7,62 x 25 mm cartridge from TT handgun : FB2+ according to EN 1522;
  • Transparent armoring providing protection form 7,62 x 39 mm cartridge from AK47 : BR4+ according to EN 1063

Version 2 include armor protection:

  • In front, at the rear, underneath and sideways the coupe, the accumulator and the fuel tank from 9 x 19 Parabellum cartridge : FB2 according to EN 1522;
  • Transparent armoring providing protection from 9 x 19 Parabellum cartridge : BR2 according to EN 1063

The company is experienced in armoring and re-equipment of the following vehicles:

  • HIUNDAI TERRACAN
  • VOLKSWAGEN T5
  • LADA NIVA
  • CHEVROLET NIVA
  • RENAULT KANGOO
  • CITROEN BERLINGO

We have developments for armoring and re-equipment of the following vehicles:

  • TOYOTA LANDCRUISER 100
  • MITSUBISHI PAJERO
  • KIA SORENTO
  • JEEP CHEROKEE
  • SUZUKI GRAND VITARA

The materials used in the armoring procedures are:

  • Flat multilayer polycarbonate glass accompanied by protocol and test certificate;
  • Ballistic steel accompanied by certificate of test shooting

   
  * All materials used in the armor protection process pass mandatory incoming control procedure.

Encashment

The armoring has recognizable rather than discreet character. The re-equipment of vehicles for encashment may include:

  • Installation of grill guard for extruding obstacles, restricting the motion of the vehicle;
  • Facing with sheet steel the load compartment (like a case) in order to difficult the access to the transported money and valuables. The rear door of the case has two locks – mechanical and electromagnetic, which can be opened by an installed button on the dashboard. The rear door of the case allows access from the coupe of the vehicle;
  • Interlocking gear of the four doors of the coupe preventing external intrusion. Light and sound signalization to warn out for unclosed door;
  • Intercom;
  • Hidden start-stop button;
  • Loopholes for counteraction from the coupe;
  • Laminated glass in the load compartment as a design solution and increased security

The armoring and re-equipment processes are carried out according to our implemented regulation system.

  • The quality is controlled in accordance to ISO 9001:2008;
  • The client receives the encashment vehicle with a set of documents: service passport; certificate of the embedded components;
  • We guarantee that after the armoring and re-equipment procedures the vehicle has no visible defects on the paint coating and trims;
  • The vehicle is stable when steering and on straight sections.
  • The acceleration time from 0 up to 100 km/h and fuel consumption are slightly increased.